We know you're a creative person and we can't wait to see your new StandOut Kraft Paper Roller in place.
So dive into this installation guide for some tips on how to get the job done right, with tools ready!
It should only take about 30-45mins once you've got everything together - so let's do it now before inspiration leaves us forever!
Please note, if you’re installing onto gib board/drywall or tiles, you may need some extra tools.
The screw size provided is 50mm/1.97in x 3mm/0.12in.
Brace yourself. Paper is coming your way and it's not going to stop until you accept our Wall-Mounted Paper Roller into your life!
Whether its a food menu, morning yoga routine or the sketch of an idea- these things are much more enjoyable with paper on hand.
The wall mounted flat bar can be spaced however far away from the bracket as needed - whatever suits best for YOU will do just fine!
Choose a wall-space to install the Bracket on. It should be installed onto a smooth surface, though if it's rough you could always put an additional thin back plate made of plywood or something similar for writing on
First insert the screw into a hole that matches up with one of the studs in your wall..
Use a level to line up the brackets, and then fasten them onto studs. This will make sure it is secure on the wall!
Note: Not all screw holes are necessary. The extra holes are for your guidance or extra support if needed.
Carefully put the Kraft Paper on. Pull down until you achieve your desired length (we recommend 900mm-1000mm).
Carefully put the Kraft Paper on. Pull down until you achieve your desired length (we recommend 900mm-1000mm).
Explore more sizes here.